Low power mode
If you do not use the machine for a certain period, it automatically lowers its power consumption.
When you press the [Energy Saver] key, the machine returns to the ready condition.
You can change the amount of time the machine waits before switching to the Low power mode under
Energy Saver Timer.
Auto Off
The machine automatically turns itself off when the job is finished, after a certain period of time has
elapsed. This function is called “Auto Off”.
You can change the Auto Off time under Auto Off Timer.
• See “System Settings”, General Settings Guide.
• The Energy Saver, Low power mode, and Auto Off functions will not operate in the following cases:
• When a warning message appears
• When the service call message appears
• When paper is jammed
• When the cover is open
• When the "Add Toner" message appears
• When toner is being replenished
• When the User Tools / Inquiry screen is displayed
• When the Counter screen is displayed
• When the Tray Paper Settings screen is displayed
• When fixed warm-up is in progress
• When data is being processed
• When operations are suspended during printing
• When the Data In indicator is on or blinking
• When the screen of stored document under the printer function is displayed
• When the internal cooling fan is active
Turning On/Off the Power
51
To Next Page
Loading...
