Ricoh pro c901 - Page 99

Paper type and weight Metric version Inch version
Paper capacity
*1
For covers:
90 300 g/m
2
(24 lb. Bond 110 lb.
Cover)
Paper Weight 3 Paper
Weight 7
*5
Custom size
Vertical: 257.0 330.2
mm
Horizontal: 364.0
487.7 mm
*5
Custom size
Vertical: 10.12 13.00
inches
Horizontal: 14.33
19.20 inches
200 sheets × 2
*1
When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. The amount
of paper that can be set is 10 mm/100 sheets approximately. See “Loading Paper”, Troubleshooting.
*2
The paper tray fence is fixed. If you wish to change the size of paper, contact your service representative.
*3
The paper size is detected automatically.
*4
Select the paper size in Tray Paper Settings.
*5
If you want to print onto custom size paper, enter the paper size in Tray Paper Settings.
*6
The optional tab sheet holder is required.
*7
Actual paper capacity might be lower than indicated here, depending on the paper type.
*8
The tab fence is required.
Paper Thickness
Paper thickness Minimum paper weight Maximum paper weight
Paper Weight 1 60.0 g/m
2
63.0 g/m
2
Paper Weight 2 63.1 g/m
2
80.0 g/m
2
Paper Weight 3 80.1 g/m
2
105.0 g/m
2
Paper Weight 4 105.1 g/m
2
163.0 g/m
2
Paper Weight 5 163.1 g/m
2
220.0 g/m
2
Paper Weight 6 220.1 g/m
2
256.0 g/m
2
Paper Weight 7 256.1 g/m
2
300.0 g/m
2
• When loading paper in the paper trays 1 and 2, place the print side face down.
• When loading paper in the multi bypass tray, the LCT, or the Wide LCT, place the print side face up.
Recommended Paper Sizes and Types
97
4