3. Replacement and Adjustment
Before You Begin
Before You Begin
• Before you begin a maintenance procedure: 1) Switch the machine off, 2) Disconnect the power
plug from the power source, 3) Allow the machine to cool for at least 10 minutes.
• Avoid touching the components inside the machine that are labeled as hot surfaces.
Special Tools
There are no special tools required for disassembling the machine. However, you must have these items:
• Standard length hex screwdriver
• Stubby hex screwdriver
• Thin radio pliers
Printing the Configuration Page
To print the Configuration Page, press the Power button 3 times rapidly (within 1 second).
25
To Next Page
Loading...
