No. Item Details Values
1 Plain Paper Adjust the fusing temperature
according to the paper type.
160 to 190 (1°C steps)
2 Thick Paper 167 to 197 (1°C steps)
3 Thin Paper 147 to 177 (1°C steps)
4 Recycled Paper 155 to 185 (1°C steps)
Adjust Other Settings
No. Item Details Values
1 Sub Scan Magnification Specify the sub scan magnification. -8 to 8 (0.1% steps)
2 Transfer Roller Bias Adjust the transfer roller bias. -10 to 10 (12 steps)
3 Image Density Adjust the image density. -3 to 3 (7 steps)
4 PNP ID
Specify the Plug and Play ID.
Normally, do not change the PNP
ID. After replacing the main board,
return the PNP ID to its original
value.
0 to 255
Utilities
57
To Next Page
Loading...
