Electrical Components
Main Board
• Do not throw away the transparent sheet covering the main board. This sheet protects the harness
from being scratched by the hooks on the inside of the bottom cover. After replacing the main
board, re-attach the sheet. If the adhesive is weak, reinforce with double-sided tape.
• Before replacing the main board, print the Configuration page by pressing the Power button 3
times rapidly.
• The EEPROM cannot be removed. Before replacing the main board, remember the machine’s
"PNP ID", "Destination Code", and "Serial No.". After replacing the main board, enter them
manually by using CE Tools. For details, refer to page 55 "Using CE Tools".
Main Board of SFP Models
1. Remove the bottom cover. (page 26)
2. Remove the main board [A]. ( ×4, ×13)
Electrical Components
43
To Next Page
Loading...
