Ricoh SP 150SUw - SC Code Severity and Troubleshooting; Fusing SC Reset Execution Steps; SC Code Severity Key

5. Troubleshooting
Service Calls
LED Indicators and Error Status
• For details about the LEDs indicators and status descriptions, refer to the user guide.
To find out the SC code, see the message area on the Status screen of the Virtual Operation Panel.
Status Screen
1. The device status indicate “Error”.
2. Error messages and SC codes are displayed in this area.
Points to Note
• All SC codes are logged.
• When an error occurs, turn the power OFF and then ON. This usually solves the problem.
63