Preparing for Printing
12
1
If the network printer search fails
This section explains how to reconfigure the settings if the network printer
search fails during the installation.
Before reconfiguring the settings, print a test page to obtain the printer's IP
address, and then configure the necessary settings.
❖ Reconfigure the printer's IP address
For details about reconfiguring the printer's IP address, see p.10 “Specifying
the printer's IP address”.
❖ Reconfigure the port settings
A On the [Start] menu, open the [Printers and Faxes] window.
B Click the icon of this printer. On the [File] menu, click [Properties].
The printer properties dialog box appears.
C Click the [Ports] tab, and then click [Add Port].
D Click [Standard TCP/IP Port], and then click [New Port...].
The Add Standard TCP/IP Printer Port Wizard appears.
E Click [Next >].
F Enter the printer's IP address that is printed on the test page, and then click
[Next >].
If a screen prompting you to specify [Device Type] appears, select the model
of your printer, and then click [Next >].
G Click [Finish].
To Next Page
Loading...
