Problem Cause Solution
Fine lines are fuzzy with
inconsistent thickness or color,
or do not appear.
Super fine lines have been
specified in the application.
PostScript 3
Change the dithering
settings on the printer
driver. For details about
the dithering settings, see
the printer driver Help.
If the problem continues
after you change the
dithering settings, use the
settings of the application
in which the image was
created to change the
color and thickness of the
lines.
Images appear only partially
colored.
The paper is damp. Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 34 "Paper Precautions".
When printing is performed
using the USB device server, a
print job cannot be completed
properly.
Even if the USB device server
has received the data
successfully, the printer cannot
complete the print job properly
because the timeout period set
on the printer is too short.
Specify a longer period for
[I/O Timeout] using the printer's
control panel.
Other Printing Problems
79
To Next Page
Loading...
