Reducing or enlarging the document
You can reduce or enlarge documents by a specific ratio, from 25% to 400% in 1% increments.
You can also reduce or enlarge documents automatically to fit a specific paper size. This function is
useful, for example, when printing Web pages.
If the [Enable Large Papers] option is selected, A3/11” × 17”/B4/8K documents can be scaled
to a size that the machine supports, so it can then be printed out.
Suppressing printing of blank pages
If a print job contains blank pages, they can be prevented from being printed.
With the Type 2 model, this function can be set using the control panel instead of the printer driver.
Printing with a cover page
You can add a cover page to the print job.
You can select to leave the cover page blank, or print the first page of the document on the cover
page. If a cover page is inserted into a duplex job, you can print on its back side also.
Paper for the cover page can either be the same as or different from the remaining pages.
Printing on custom size paper
You can print using non-standard size paper by specifying the size of the paper as custom size.
Superimposing text on prints (watermark)
You can superimpose watermark text on prints. Various predefined watermarks are provided. You
can also create your own watermarks.
• Some of the functions described above might not be available depending on the printer driver or
operating system. For details, see the printer driver Help.
• For details about suppressing blank page prints with the Type 2 model, see p.300 "Printer Feature
Settings".
Using Various Print Functions
155
To Next Page
Loading...
Need help?
General
