Using Manuals
Be sure to read this section before any other part of this manual.
• This manual uses procedures based on Windows XP as an example, unless otherwise specified.
Procedures and screens might vary depending on the operating system you are using.
Installing Manuals on Your Computer
The manual CD-ROM provided with the machine contains manuals in HTML format and PDF. Follow the
instructions below to install it.
• System requirements for installing the HTML manual:
• Operating system: Windows XP/Vista/7, Windows Server 2003/2003 R2/2008/2008
R2
• Minimum display resolution: 800 × 600 pixels
• Recommended browsers for viewing the HTML manual:
• Internet Explorer 6 or later
• Firefox 3.5 or later
• Safari 4.0 or later
• Applications for viewing the PDF manuals:
• Adobe
®
Acrobat
®
Reader
®
or Adobe Reader
• The following procedure is based on Windows XP as an example. If you are using another
operating system, the procedure might vary slightly.
1. Quit all applications currently running.
2. Insert the manual CD-ROM into the CD-ROM drive.
If you are using a computer running a Macintosh operating system, open “Manuals.htm” from the
CD-ROM root directory.
3. Select a language for the interface and a product, and then click [OK].
4. Click [Install manuals].
5. Follow the instructions on the screen to complete the installation.
6. Click [Finish] when the installation is completed.
7. Click [Exit].
Using Manuals
19
To Next Page
Loading...
Need help?
General
