• You may not be able to perform duplex printing on 8 " × 13 ", 8
1
/
2
" × 13 ", Folio (8
1
/
4
" × 13 "),
or 16K (195 mm × 267 mm) size paper in the following cases:
• PCL/DDST printer driver
When [Gradation:] in [Print Quality] is set to [Fine]
• PostScript 3 printer driver
When [Print Quality:] in [Printer Features] is set to [Best Quality]
Unsupported Types of Paper
Avoid using the following paper as they are not supported by this machine.
• Paper meant for an ink-jet printer
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Dirty or damaged paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead.
Malfunctions are especially likely when using paper printed on by other than a laser printer (e.g.
monochrome and color copiers, ink-jet printers, etc.)
• Special paper, such as thermal paper, aluminum foil, carbon paper and conductive paper
• Paper that is heavier or lighter than the specified limitations
• Paper with windows, holes, perforations, cutouts, or embossing
• Adhesive label paper on which the adhesive under-layer or base paper is exposed
• Paper with clips or staples
• Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper jam.
• Do not load OHP transparencies. Load translucent media only.
• Do not use paper that has already been printed onto by other printers.
• When loading paper, take care not to touch the surface of the paper.
• Even supported types of paper may cause paper jams or malfunctions if the paper is not in good
condition.
2. Getting Started
96
To Next Page
Loading...
Need help?
General
