5. Press the [ ][ ] keys to select [No.], and then enter the desired Quick Dial number (1 to
20) or Speed Dial number (1 to 200) using the number keys.
If a destination is already registered for the input number, the fax number and fax name registered
for that number appear.
6. Press the [ ][ ] keys to select [Fax No.], and then enter the fax number (up to 40
characters).
7. Press the [ ][ ] keys to select [Name], and then enter the fax name (up to 20 characters).
8. Confirm the setting, and then press the [OK] key.
9. Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A fax number can contain 0 to 9, pause, " ", " ", and space.
• If necessary, insert a pause in the fax number. The machine pauses briefly before it dials the digits
following the pause. You can specify the length of the pause time in the [Pause Time] setting under
fax transmission settings.
• To use tone services on a pulse-dialing line, insert " " in the fax number. " " switches the dialing
mode from pulse to tone temporarily.
• If the machine is connected to the telephone network through a PBX, make sure to enter the outside
line access number specified in [PBX Access Number] before the fax number.
• Use Web Image Monitor to register an Internet Fax destination (an e-mail address).
• A password for accessing the [Address Book] menu can be specified in [Admin. Tools Lock].
• For details about entering characters, see p.127 "Entering Characters".
• For details about [Pause Time], see p.262 "Fax Transmission Settings".
• For details about [PBX Access Number], see p.295 "Administrator Settings".
• For details about registering an Internet Fax destination, see p.206 "Registering Fax Destinations
Using Web Image Monitor".
• For details about [Admin. Tools Lock], see p.295 "Administrator Settings".
Modifying fax destinations
This section describes how to modify the information of registered destinations.
6. Using the Fax Function
204
To Next Page
Loading...
Need help?
General
