Preparation for making enlarged or reduced copies
To always enlarge or reduce copies:
1. Configure the machine's default [Reduce/Enlarge] setting.
For details, see p.253 "Copy Settings".
To use this function for the current job only:
1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.
For details, see p.162 "Making Enlarged or Reduced Copies".
Copying multiple pages onto a single sheet of paper
You can copy multiple pages of an original onto a single sheet of paper.
• This function is only available when the original is set in the ADF, not when it is set on the exposure
glass.
You can either set this machine to always make photocopies in 2-in-1 or 4-in-1 mode, or use this
function only when necessary.
Preparation for copying multiple images
To always make photocopies in 2-in-1 or 4-in-1 mode:
Feature Highlights
25
To Next Page
Loading...
Need help?
General
