Ricoh SP C240SF - Page 72

2. Connect the Ethernet cable to the Ethernet port.
CES093
3. Connect the other end of the cable to the network (e.g., a network hub).
4. Attach the cable cover.
CES094
• For details about network environment settings, see p.74 "Configuring the Machine".
• For details about installing printer drivers for network connection, see the instructions provided on
the driver CD-ROM.
Reading the LED lamps
1
2
CES095
1. Yellow: Flashes when 100BASE-TX or 10BASE-T is being used.
2. Green: Lights up when the machine is properly connected to the network.
2. Getting Started
70
2