Replacing the Waste Toner Bottle
Messages on the screen
• Replace the waste toner bottle when the following message appears on the screen:
"Replace Waste Toner Bottle"
• Prepare a waste toner bottle when the following message appears on the screen:
"Almost Full Waste Toner Bottle"
• Waste toner bottles cannot be reused.
• For easy replacement, we recommend you purchase and store extra waste toner bottles.
• When removing the waste toner bottle, make sure not to tilt it.
• Make sure the transfer unit is installed. If the transfer unit is not installed, install it before turning on
the power.
• Comply with the waste toner bottle recycling program, whereby used waste toner bottles are
collected for processing. For details, ask your sales or service representative.
• Before removing the waste toner bottle from the machine, spread paper or similar material around
the area to keep toner from dirtying your workspace.
1. Pull the front cover open lever and then carefully lower the front cover.
To Next Page
Loading...
