1. Print Cartridges
Install the print cartridges from the machine rear, in the order of cyan (C), magenta (M), yellow (Y), and black
(K). Messages appear on the screen when print cartridges need to be replaced, or new ones need to be
prepared.
2. Fusing Unit Lever
Lower both the left and right levers when you print on an envelope.
3. Fusing Unit
Fuses toner to the paper.
You might have to move this unit to check for or remove jammed paper.
4. Waste Toner Bottle
Collects toner that is wasted during printing.
5. Transfer unit
You need to remove this when you replace the waste toner bottle.
• For details about the messages that appear on the screen when consumables need to be replaced,
see page 172 "Error & Status Messages on the Control Panel".
1. Getting Started
20
To Next Page
Loading...
