2. Windows version
22
Setting Printer IP Address (Supported on SP 150w and SP 150SUw only)
You can choose to obtain the printer’s IP address, or set a xed IP address for the printer. To set a xed IP ad-
dress for the printer, consult your network administrator for assistance.
Setting Soft AP (Supported on SP 150w and SP 150SUw only)
Enter the Service Set Identier (SSID) and password for the Soft AP network, then toggle the ON/
OFF switch to turn on or off Soft AP. The printer must be restarted for any change in Soft AP status to
take effect.
To Next Page
Loading...
