4. Android/iOS version
38
Setting Printer IP Address (Supported on SP 150w and SP 150SUw only)
You can choose to obtain the printer’s IP address, or set a xed IP address for the printer. To set a
xed IP address for the printer, consult your network administrator for assistance.
1. On the Settings page, tap [TCP/IP].
2. Toggle the [Use Manual Address] switch to turn on the “Static” method. The
printer must be restarted for any change in IP address setting status to take
effect.
3. If the “Static” method is turned on, specify the [IP Address], [Submask], and
[Gateway] settings. Tap [Done] to save the setting.
To Next Page
Loading...
