14
The display shows the shooting information of the image in playback mode. The
display changes in the following sequence each time you press the 4 button:
Normal Display/Info 1 in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. In “Normal
Display”, A1 to A10 are displayed. In “Info 1”, B1 to B8 are displayed as well.
C1 to C6 appear at the positions of B3 to B8 when “Info 2” is selected.
* A1 appears only if the Face Detection function worked when the image was shot.
* In “Normal Display”, A3 disappears if no operation is performed for two seconds.
* A5 appears even when “No Info” is selected, but disappears if no operation is
performed for two seconds. When no operation is performed for two seconds in
“Normal Display” or “Histogram + Info”, only “Edit” disappears.
* A10 appears only when the volume is being adjusted during playback of movies
(p.48).
* When “Normal Display” is selected, the current date and time appears for two
seconds in the B4 to B8 positions.
Display in Q Mode
A1
Face Detection icon
B2
Aperture
A2
Playback mode
B3
Histogram
Q : Still picture (p.48)
B4
Sensitivity
K : Movie (p.48)
B5
Recorded Pixels
A3
Battery level indicator (p.19)
B6
Quality Level
A4
Protect icon
B7
White Balance
A5
Four-way controller guide
B8
AE Metering
A6
File number
C1
Height
A7
Folder number
C2
Air pressure
A8
Memory status (p.22)
C3
Lens direction
A9
Eye-Fi communication status
C4
GPS time
A10
Volume icon
C5
GPS latitude
B1
Shutter speed
C6
GPS longitude
10
To Next Page
Loading...
