54
• The GPS function of this camera was designed and manufactured for
personal digital camera use only. Do not try to use it as a navigation tool
for aircraft, motor vehicles, or people, or for surveying. We will not be held
liable for any damages caused by use of this camera for any of these
purposes.
Set the [GPS On/Off] to [On] for receiving GPS information (latitude, longitude,
altitude, date and time etc.).
The GPS function needs to be always activated to embed GPS information on an
image, record it to the camera as a log, save it to the SD Memory Card as a log
file, and correct the camera clock automatically.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS On/Off].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select [Off] or [On].
Off: Does not receive GPS information
On: Receives GPS information
Hereby, RICOH IMAGING COMPANY, LTD., declares that this SG761 GPS
Module/GYSFDMASA-P2 is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
For a full version of the Declaration of Conformity (DoC), please refer to
http://www.ricoh-imaging.co.jp/english.
The CE Mark is a Directive conformity mark of the European Union.
Preparation for Using the GPS Function
GPS On/Off
GPS Logging
MENU
GPS
GPS Time Sync
Off
Off
On
Cancel
OK
OK
To Next Page
Loading...
