55
When [GPS On/Off] is set to [On], the received GPS information is recorded onto
captured images.
The following icons appear on the display.
• When [GPS On/Off] is set to [On], the camera performs positioning
regularly even while the camera power is off, which reduces the battery life.
Estimated battery life: Approx. 60 hr.
(When receiving GPS information continuously with [GPS On/Off] set to
[On], [Logging Interval] set to [15sec.], and the camera turned off.)
• Before changing the battery, set [GPS On/Off] to [Off].
Recording GPS Information on Captured Images
(White)
GPS information is being received. [GPS On/Off] is set to [On], and
signals from GPS satellites are being received.
GPS information has been received. [GPS On/Off] is set to [On], and
signals from GPS satellites have been received.
(Red)
GPS information has not been received. [GPS On/Off] is set to [On], but
signals from GPS satellites have not been received.
GPS error. To recover from an error, turn off the camera, remove and then
re-insert the battery and turn on the camera again. If
is still displayed,
the built-in GPS unit may be malfunctioning. Contact your nearest service
center.
When [GPS On/Off] is set to [Off], no icon is displayed.
• Only when is displayed on the capture mode screen, GPS information
will be recorded onto images.
However, in the following situations GPS information obtained prior to the
shooting may be recorded.
• When doing interval shooting
• When the camera fails to determine its position because it has been
moved to a location where it cannot receive GPS signals
• When [GPS On/Off] is set to [On], the camera performs positioning
regularly even while the camera power is off, which reduces the battery life.
To Next Page
Loading...
