Ricoh WG-5 GPS - Setting the Date and Time

24
Set the current date and time and the display format.
1 Press the four-way controller (5).
The frame moves to [mm/dd/yy].
2 Use the four-way controller (23)
to choose the date and time
display format.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/
mm/dd].
3 Press the four-way controller (5).
The frame moves to [24h].
4 Use the four-way controller (23) to select [24h] (24-hour
display) or [12h] (12-hour display).
5 Press the four-way controller (5).
The frame returns to [Date Format].
6 Press the four-way controller (3).
The frame moves to [Date].
7 Press the four-way controller (5).
The frame moves to the month.
8 Use the four-way controller (23) to change the month.
Change the day and year in the same manner.
Next, change the time.
9 Press the four-way controller (3) to select [Settings
complete].
10 Press the 4 button.
This confirms the date and time.
Setting the Date and Time
If you press the 4 button in step 10, the camera clock is reset to 0 seconds.
To set the exact time, press the 4 button when the time signal (on the TV,
radio, etc.) reaches 0 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you can
cancel the setting operation and switch to capture mode by pressing the
3 button. In this case, the [Initial Setting] screen will appear next time
you turn the camera on.
MENU
mm/dd/yy 24 h
00:00
Cancel
Settings complete
Date Adjustment
Date Format
Date
Time
01/01/2015