Ricoh WG-5 GPS - Resetting to Default Settings (Reset); Displaying the Clock Display

31
You can reset the camera settings to their defaults.
1 Use the four-way controller (23) to select [Reset] in the
[W Setting] menu.
2 Press the four-way controller (5).
The [Reset] screen appears.
3 Use the four-way controller (2) to
select [Reset].
4 Press the 4 button.
The settings return to the defaults.
You can use the camera as a clock. With the camera turned off, press and hold
down the 4 button to display the clock on the display.
1 Press and hold down the 4
button.
The camera turns on and the clock appears
on the screen.
The camera turns off automatically after
approximately 10 seconds.
Pressing the power button turns the
camera off immediately.
Resetting to Default Settings (Reset)
Displaying the Clock Display
Not to function the Clock Display by pressing 4 button, set [Clock Display]
to P (Off) in [Startup Shortcut] from the [W Setting] menu.
OK
OK
Reset
Returns to default
settings
Reset
Cancel