56
1
Press the Q button after shooting still pictures or movies.
The camera enters Q mode and an image appears on the display.
2
Press the 4 button until the Info 2 display appears.
If GPS information cannot be obtained, “--”
appears on the display.
*The date and time information is displayed
in GPS time (the reference time scale of
the GPS system). This may be different
from the time you have set on the camera.
• For a movie, the GPS information obtained at the start of recording is
recorded.
• For divided movie files, the GPS information before dividing is displayed.
• For a movie with a title picture, the GPS information of the movie is
displayed.
• When shooting in (Interval Shot) mode, GPS information may not be
recorded onto images.
• The direction information obtained from the electronic compass
measurements is also recorded at the time of shooting when GPS location
information can be obtained from GPS satellites.
Displaying the GPS Information Recorded on Captured Image
For details on how to use the GPS function, e.g. recording and saving logs,
please refer to the Operating Manual (PDF) posted on our website.
10
To Next Page
Loading...
