117
3
Taking Pictures
The camera constantly tracks the subject during movie recording and 
automatically adjust focus. This is useful for shooting a moving subject.
The default setting is P (Off).
1
Use the four-way controller (23) to select [Enable 
Autofocus] in the [C Movie] menu.
2
Use the four-way controller (45) 
to select O (On)/P (Off).
O(On) Continues to focus on the 
subject during movie 
recording.
P  (Off) Locks focus by pressing the 
shutter release button 
halfway before recording.
The setting is saved.
You can use the optical zoom while recording movies.
The default setting is P (Off).
1
Use the four-way controller (23) to select [Enable Optical 
Zoom] in the [C Movie] menu.
2
Use the four-way controller (45) 
to select O (On)/P (Off).
O(On) Optical zoom is available.
P (Off) Optical zoom is not 
available.
The setting is saved.
Constantly Adjusting Focus While Recording 
Movies
• Noise from focusing operation is recorded while recording movies.
• When set to O, the autofocus area is fixed to J (Multiple) during movie 
recording.
Setting the Optical Zoom
Noise from zooming operation is recorded while recording movies.
Movie
MENU
Recorded Pixels
Mov
iSRe
Exit
Wind Suppression
Enable Optical Zoom
Enable Autofocus
Movie
MENU
Recorded Pixels
Mov
iSRe
Exit
Wind Suppression
Enable Optical Zoom
Enable Autofocus