208
8
Using the GPS
The camera corrects its clock automatically using the time data received from
GPS satellites.
1
Use the four-way controller (23) to select [GPS] in the
[WSetting] menu.
2
Press the four-way controller (5).
The [GPS] screen appears.
3
Use the four-way controller (23) to select [GPS Time Sync].
If this item is grayed out and cannot be selected, set [GPS On/Off] to [On].
4
Press the four-way controller
(5).
The setting of [World Time] is displayed.
5
Use the four-way controller (45)
to switch between [On] and [Off].
6
Press the 4 button.
Returns to the [GPS] screen.
Correcting Time Automatically
• [GPS Time Sync] can be set only when [GPS On/Off] is set to [On].
• The GPS Time Sync function does not work in the following situations:
• During movie recording
• During movie playback
• During slideshow
• When (Interval Shot) or (Interval Movie) is set
• When the self-timer is set
GPS On/Off
GPS Logging
GPS Time Sync Off
On
MENU
GPS
Time Dif.
OK
Cancel
Destination
New York
Syncs camera time to
current GPS location
04/04/2015
01:25
+5:00
Off
OK
MENU
DST
OF
OFF
To Next Page
Loading...
