Ricoh WG-5 GPS - Capture Mode Palette; Take a Picture

74
3
Taking Pictures
5 Press the 4 button.
The save process starts.
When the save process is completed, the camera returns to capture mode.
1 Use the four-way controller
(2345) to select E from the
Capture Mode Palette.
2 Press the 4 button.
The saved settings are retrieved.
Change the settings already in the E mode if necessary.
3 Take a picture.
To Take Pictures in E Mode
The settings changed in E mode are valid only when the shooting mode is
set to E. Changing the capture mode or turning off the power returns the
camera to the settings saved with [Save as E]. To change the settings of
E mode, perform the operations in [Save as E] again.
USER
Captures images with the
settings saved as USER
1/2
OK
OK
MENU
Cancel