➥Buzzer
ON Buzzer sounds once when the unit goes into Protection Mode.
OFF Buzzer does NOT sound when going into Protection Mode.
Power State
➥Power Settings
This option is for the state of the RD60xx itself - NOT the RD60xx’s Output state
Power On Turn ON RD60xx unit when the Primary Power Supply energises.
Power Off Do NOT Turn RD60xx unit ON when the Primary PS energises.
LastState Return to the ON/OFF state from the last Primary PS shut-off.
LastState Requires the button-cell battery to be installed in the RD60xx to operate.
If the battery is NOT installed, the unit will operate as per the Power Off option.
Power Switch
➥Power Settings
IF the Front Power Switch Modification is installed …
ON Enables use of the Front Power Switch.
OFF Disables the Front Power Switch.
IF the Front Power Switch Modification has NOT been made …
ON Will add a few seconds start-up delay. (Otherwise, no effect.)
OFF No effect.
Good Practice - Set to OFF if modification has not been made.
Reset metrics
➥Battery Charger
ON Resets Ah, Wh, and C.Time (Charge Time) when the battery is disconnected.
OFF Continues adding to existing metrics.
Note:
When OFF, the RD60xx requires the user to manually (“MEM” + “●”) reset the
metrics as desired.
To Next Page
Loading...
