Riden RD6012 - External LED - Modification

55
18.2. External LED - Modification
This modification adds a red LED under the “ON/OFF” Button. In combination with the existing green
LED, 3 colours become possible, allowing the button to respond in a variety of ways using the ‘External
LED’ setting.
Here is a YouTube video showing one of the options available with this modification:
RD60xx 'External LED' Mod In Action
Here is the link to the Original Posting about this modification on EEVBlog
Materials Needed:
Insulated Hook-up Wire 30 Gauge, or smallest available suggested.
LED Red, 0603 or 0805 package.
Resistor 470 Ω, surface mount package suggested.
1) Access the Front side of the Front PCB. (See: Accessing the Internals )
Area of Work - beside LED marked D4