Riello BS2D - Burner Description; Burner Equipment

13
20135737
GB
Technical description of the burner
4.9 Burner description
1 Air pressure switch
2 6-pole socket for train connection
3 Control box with built-in 7-pole socket
4 Reset button with lockout lamp
5 Head assembly support
6 Pressure test point
7 Flange with insulating gasket
8 Air damper adjustment assembly
9 Air damper servomotor
10 4-pole socket for 2nd stage
11 Combustion head adjustment screw
12 Combustion head
13 Capacitor
4.10 Burner equipment
Flange with insulating gasket . . . . . . . . . . . . . . . . . . . . . . No. 1
Screws and nuts for fixing the flange to the boiler . . . . . . . No. 4
7-pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Screw and nut for flange . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
4-pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Remote reset connection . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Remote reset kit
The burner has a remote reset kit (RS) consisting of a connection
and a push-button operating at a distance of 20 metres max.
In order to install it, remove the safety lockout device installed at
the factory and insert the lockout supplied with the burner (see
electrical diagram).
0
9
0
9
3
13
1
10
7
12
4
11
8
6
9
5
2
Fig. 5
20135309