Riello BS2D - Page 6

20135737
4
GB
Declarations
Declaration of Conformity A.R. 8/1/2004 & 17/7/2009 – Belgium
Manufacturer: RIELLO S.p.A.
37045 Legnago (VR) Italy
Tel. ++39.0442630111
www.rielloburners.com
Distributed by: VAN MARCKE HQ
LAR Blok Z 5,
B-8511 Kortrijk (Aalbeke) Belgium
Tel. +32 56 23 7511
e-mail: riello@vanmarcke.be
URL. www.vanmarcke.com
This document certifies that the series of devices specified below is in compliance with the model described in the EC Declaration of
Conformity and has been manufactured and distributed in compliance with the requirements defined in the Legislative Decree of
January 8th 2004 and July 17th 2009.
Type of product: Forced draught gas burner
Model: BS1D - BS2D - BS3D - BS4D
Regulation applied: EN 676 and A.R. of January 8th 2004 - July 17th 2009
Values measured: BS1D
BS2D
BS3D
BS4D
Max. CO: 13 mg/kWh
Max. NOx: 66 mg/kWh
Max. CO: 13 mg/kWh
Max. NOx: 54 mg/kWh
Max. CO: 15 mg/kWh
Max. NOx: 51 mg/kWh
Max. CO: 11 mg/kWh
Max. NOx: 52 mg/kWh
Controlling organisation: TÜV SÜD Industrie Service GmbH
Ridlerstrase, 65
80339 Munchen DEUTSCHLAND
Legnago, 21.04.2018 General Manager
RIELLO S.p.A. - Burners Department
Research and Development Director
RIELLO S.p.A. - Burners Department
Eng. U. Ferretti Eng. F. Comencini