CONTENTS
OVERVIEW 5
MULTI SENTRY 5
MCM VIEWS 6
MSM VIEWS 7
VIEW OF THE MCM CONNECTIONS 8
VIEW OF THE MSM CONNECTIONS 9
VIEW OF THE CONTROL PANEL 10
BATTERY BOX (OPTIONAL) 11
SEPARATE BYPASS INPUT (OPTIONAL) 12
ADDITIONAL INTERNAL BATTERY CHARGERS 12
INTERNAL TRANSFORMER (OPTIONAL) 13
INSTALLATION 14
STORING THE UPS AND THE BATTERY BOX 14
PREPARING FOR INSTALLATION 14
PRELIMINARY INFORMATION 14
ELECTROMAGNETIC COMPATIBILITY 15
INSTALLATION ENVIRONMENT 15
INTERNAL BATTERIES 16
REMOVING THE UPS AND THE BATTERY BOX FROM THE PALLET 17
PRELIMINARY CHECK OF CONTENTS 19
INSTALLING THE UPS AND THE BATTERY BOX 19
STEPS TO BE TAKEN TO GAIN ACCESS TO THE TERMINALS OF THE UPS / BATTERY BOX 19
ELECTRICAL CONNECTIONS 20
WIRING DIAGRAMS FOR CONNECTING TO THE ELECTRICAL SYSTEM 20
INTERNAL PROTECTIVE DEVICES OF THE UPS 23
EXTERNAL PROTECTIVE DEVICES 24
CROSS SECTION OF THE CABLES 25
CONNECTIONS 25
CONNECTIONS OF THE MODEL WITH SEPARATE BYPASS 26
CONNECTION OF UPS SINGLE-PHASE INPUT 26
R.E.P.O. 27
EXTERNAL SYNC 27
CONNECTING THE REMOTE MAINTENANCE BYPASS 28
CONNECTING THE BATTERY BOX TO THE UPS 30
MULTIPLE EXPANSIONS 31
To Next Page
Loading...
