Configurations which can be modified by means of configuration software available at service centres are listed in the following
table.
Selects one of five different operating modes
Selects the rated output voltage
Selects the rated output frequency
Waiting time for automatic power-on after the return of mains
voltage
Automatic UPS power-off in battery operation mode if the
charge is lower than 5%
Selects the audible alarm operating mode
Selects the auxiliary socket operating mode
Programmed UPS power on/off (daily)
Maximum battery operation time
Selects the user overload limit
Bypass Synchronization speed
Selects the synchronisation speed of the inverter to the bypass
line
Selects the source of synchronisation for the inverter output
Activates reading of the external temperature probe
Selects the mode of use of the bypass line
To Next Page
Loading...
