Contents
7.3 Thermal relay calibration............................................................................................................................................22
8 Start-up, calibration and operation of the burner..................................................................................................................23
8.1 Notes on safety for the first start-up...........................................................................................................................23
8.2 Burner calibration.......................................................................................................................................................23
8.2.1 Firing ..........................................................................................................................................................................23
8.2.2 Operation ...................................................................................................................................................................23
8.3 Burner operation ........................................................................................................................................................25
8.3.1 Burner starting ...........................................................................................................................................................25
8.3.2 Firing failure ...............................................................................................................................................................25
8.3.3 Undesired shutdown during operation .......................................................................................................................25
8.4 Steady state operation ...............................................................................................................................................26
8.4.1 System equipped with one control device TR............................................................................................................26
8.4.2 System not equipped with control device TR (jumper wire installed).........................................................................26
8.5 Final checks ...............................................................................................................................................................26
9 Maintenance ..............................................................................................................................................................................27
9.1 Notes on safety for the maintenance .........................................................................................................................27
9.2 Maintenance programme ...........................................................................................................................................27
9.2.1 Maintenance frequency..............................................................................................................................................27
9.2.2 Checking and cleaning...............................................................................................................................................27
9.3 Opening the burner ....................................................................................................................................................28
9.4 Closing the burner......................................................................................................................................................28
9.5 Burner start-up cycle diagnostics...............................................................................................................................29
9.6 Resetting the control box and using diagnostics........................................................................................................29
9.6.1 Resetting the control box ...........................................................................................................................................29
9.6.2 Visual diagnostics ......................................................................................................................................................29
9.6.3 Software diagnostics..................................................................................................................................................29
A Appendix - Accessories (optional)..........................................................................................................................................32
B Appendix - Electrical panel layout...........................................................................................................................................34
To Next Page
Loading...
