Riello RS 810/EV BLU - Supply Cables and External Connections Passage

20163082
26
GB
Installation
5.12.1 Supply cables and external connections
passage
All the cables to be connected to the burner must be threaded
through cable grommets. The use of the cable grommets can
take various forms; by way of example see Fig. 25.
Key (Fig. 25)
1 Electrical supply - Bore for M32
2 Consents and safety devices - Bore for M20
3 Minimum gas pressure switch - Bore for M20
4 VPS gas valve leak detection control kit- Bore for M20
5 Gas train - Bore for M20
6 Available - Bore for M20
7 Available - Bore for M16
A Motor revolution sensor
B Maximum gas pressure switch
C GAS servomotor
D AIR servomotor
After carrying out maintenance, cleaning or
checking operations, reassemble the cover and
all the safety and protection devices of the burner.
Fig. 25
20076574