Rigol 2000 Series User Manual

Chapter 15 System Function Setting RIGOL
MSO2000A/DS2000A User’s Guide
15-15
11. Copies
Press this key to set the number of copies to be printed. Rotate the multifunction
knob
to select the desired number of copies. The range is from 1 to 999.
12. Invert
Press this key to set the print color invert to “ON” or “OFF” and the default is
“OFF”.
Power Status
Connect the oscilloscope to AC power using a power cord and at this point, the
oscilloscope is energized. MSO2000A/DS2000A oscilloscope allows users to set the
power status of the oscilloscope after it is energized. Press Utility  PowerStatus
to set the power status to “Default” or “Open”.
 Default: after the oscilloscope is energized, press the power key at the front
panel to start the instrument.
 Open: the instrument starts directly when it is energized.
Note: At this point, you can still press the power key at the front panel to turn
off the instrument.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English