Chapter 5 To Trigger the Oscilloscope RIGOL
MSO2000A/DS2000A User’s Guide 5-7
Noise Rejection
Noise rejection can reject the high frequency noise in the signal and reduce the
possibility of miss-trigger of the oscilloscope.
Press MENU ïƒ Setting ïƒ Noise Reject in the trigger control area (TRIGGER) at
the front panel to enable or disable noise rejection.
Note: When the trigger source is any of D0 to D15, Noise Reject is grayed out and
disabled.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
