Rigol DHO900

Essential safety precautions to avoid injury and instrument damage during operation.

Steps for initial inspection, setup, and understanding the user interface.

Adjusting vertical scale/offset and horizontal time base/position for waveform display.

Configuring data acquisition modes and trigger settings for stable signal capture.

Performing calculations and frequency spectrum analysis on waveforms.

Utilizing auto measurements, cursors, and DVM/Frequency Counter.

Analyzing serial communication protocols like RS232, I2C, and SPI.

Managing files, setups, and performing firmware upgrades on the instrument.

Configuring I/O, network, language, and self-calibration.

Methods for controlling the oscilloscope remotely via USB or LAN.

Solutions for common operational problems and errors.

Reference table for default instrument configurations.