Need help?Do you have a question about the Rigol DHO1204 and is the answer not in the manual?
General| Model | DHO1204 |
|---|---|
| Bandwidth | 200 MHz |
| Channels | 4 |
| Vertical Resolution | 12-bit |
| Max Input Voltage | 400 V (DC + AC peak) |
| Timebase Range | 1 ns/div to 1000 s/div |
| Vertical Sensitivity | 500 μV/div to 10 V/div |
| Input Impedance | 1 MΩ || 16 pF ± 3 pF |
| Trigger Types | Edge, Pulse, Video, Pattern |
| Serial Bus Triggering and Decoding | I2C, SPI, UART, CAN, LIN |
| Interface | USB Host, USB Device, LAN, HDMI |
| Operating Temperature | 0 °C to 50 °C |
| Display | 10.1-inch capacitive touchscreen |
Essential safety precautions for operating the instrument to prevent injury or damage.
Explanation of warning and caution notices and safety symbols used in the manual and on the product.
Defines measurement categories and specifies the instrument's applicable measurement category.
Procedures for setting up the oscilloscope for initial operation.
Instructions on how to activate or deactivate analog input channels for signal display.
Guidance on adjusting the voltage per division for optimal waveform visualization.
Setting the voltage threshold that determines the trigger point on a signal edge.
Automated measurement of waveform parameters like period, frequency, and rise time.
Manually measuring X and Y values of selected waveform points using cursors.
Using the built-in digital voltmeter for 4-digit voltage measurements.
Utilizing the frequency counter for measuring frequency, period, or edge events.
Decoding parallel bus signals by configuring clock, data, and bus parameters.
Decoding RS232 serial bus data by setting source, baud rate, and data package parameters.
Decoding I2C serial bus signals by configuring clock/data sources and address information.
Functionality to search for specific trigger events like edges and pulse widths.
Saving current setups, waveforms, or screen images to memory.
Steps to diagnose and resolve issues with signal display on the screen.
Table detailing the default factory settings for various instrument parameters.
To Next Page
