Rigol DHO1204

After setup, click or tap the key at the upper-right corner of the front panel to
per
for
m the waveform recording.
Save Group
• Click or tap
Save Group, then Operation is set t
o "Sav
e Group".
• Under
Save Group, select one or mor
e it
ems from "Save Image", "Save Wave",
and "Save Setup".
After setup, click or tap the
key at the upper-right corner of the front panel to
save the select
ed items based on the settings. The location where the file is saved
depends on the
File Path setting in Storage menu. For details, please refer to To Save
a File .
20.9 Self-check
In Utility menu, click or tap Self Check to enter the "Self Check" setting. You can test
the following self-check items for the device.
Key Test
Click or tap Key Test to enter the key test interface (virtual front-panel key), as shown
in the figure below.
Figure 20.3 Key Test Interface
A
t this time, y
ou can press the front-panel keys to check whether the virtual keys are
highlighted. If yes, it indicates that the keys work normally; if no, it indicates that
System Utility Function Setting
DHO1000 User Guide
236
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30