RIGOL
Programming Guide for DG1000
Structure of this Document
Chapter 1 Programming Overview
This chapter introduces how to programme DG1000 generator using commands and
how to input the commands in right format.
Chapter 2 DG1000 Command System
This chapter gives detailed information of each command supported by DG1000,
including command syntax, function description, considerations when using command
as well as some application examples.
Chapter 3 Application Examples
This chapter shows you how to realize the examples in DG1000 User’s Guide via
commands.
Appendix: Commands Reference A-Z
The Appendix lists all the commands
alphabetically in favor of quick reference.
Note:
DG1000 series Dual-channel Function/Arbitrary Waveform Generator includes DG1022
and DG1022A. In this manual, DG1022 is taken as an example to illustrate the
command system and its using method.
To Next Page
Loading...
Need help?
General
