Rigol DG1012 Programming Guide

RIGOL Programming Overview
Programming Guide for DG1000
1-2
Communication Interfaces
Computers communicate with the generator by sending and receiving commands over
USB interface. Command is sended and identified in the form of ASCII character
strings for users to easily control the generator and do user-defined development.
Operations that you can do with a computer and a generator include:
 Set the generator.
 Output waveforms from the generator.
Connection:
Please connect the USB Device port at the rear panel of DG1000 with the
corresponding USB interface on the computer using an USB cable.

Rigol DG1012 Specifications

General

Brand	Rigol
Model	DG1012
Category	Portable Generator
Language	English