Name: Rigol DG1012
Brand: Rigol
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Programming Overview RIGOL

Programming Guide for DG1000

1-3

Commands Introduction

Command Syntax

The command systems of DG1000 present a hierarchy structure (tree system) and

each command consists of a “Root” keyword and one or multiple sub-keywords. The

keywords are separated by ":" and are followed by the parameter settings available,

"?" is added at the end of the command string to indicate query and the command and

parameter are separated by "space".

For example,

FUNCtion:SQUare:DCYCle {<percent>|MINimum|MAXimum}

FUNCtion:SQUare:DCYCle? [MINimum|MAXimum]

FUNCtion is the root keyword of the commmand, SQUare and DCYCle are the

second-level and third-level keywords respectively, all the keywords are separated by

“:”. <percent> denotes the parameter that users can set; “?” denotes query; the

command FUNCtion:SQUare:DCYCle and parameter are separated by “space”.

“,” is usually used to compart multiple parameters existed in one command, for

example,

DATA VOLATILE,<value>,<value>, . . .

Rigol DG1012 Programming Guide

Other manuals for Rigol DG1012