Rigol DG1032Z

RIGOL Chapter 5 Specifications
5-6 DG1000Z User’s Guide
Pulse Width >60ns (typical)
Maximum Frequency 1MHz
Two-channel Characteristics - Phase Offset
Range
0° to 360°
Waveform Phase
Resolution
0.03°
Clock Reference
External Reference Input
Lock Range
10MHz±50Hz
Level
250mVpp to 5Vpp
Lock Time
<2s
Impedance (typical) 1kΩ, AC coupling
Internal Reference Output
Frequency 10MHz±50Hz
Level 3.3Vpp
Impedance (typical)
50Ω, AC coupling
Sync Output
Level TTL-compatible
Impedance 50Ω, nominal value
Overvoltage Protection
Overvoltage protection will take effect once any of the following two conditions is
met:
 The amplitude setting in the generator is greater than 2Vpp or the output
offset is greater than |2V
DC
|, the input voltage is greater than
±11.5×(1±5%)V (<10kHz).

The amplitude setting in the generator is lower than or equal to 2Vpp or the
output offset is lower than or equal to |2V
DC
|, the input voltage is greater than
±3.5×(1±5%)V (<10kHz).
General Specifications
Power
Power Voltage 100V to 240V (45Hz to 440Hz)
Power Consumption
Less than 40W
Fuse
250V, T3.15A
Display
Type 3-inch TFT LCD
Resolution 320 Horizontal×RGB×240 Vertical Resolution
Color 16M color