Rigol DS1000B Series Programming Guide

Command Systems RIGOL
Programming Guide for DS1000B Series
2-111
:CURSor:MANUal:SOURce <source>
:CURSor:MANUal:SOURce?
Function:
The command sets the cursor source of manual cursor. The <source> may be
CHANnel1, CHANnel2, CHANnel3, CHANnel4 or MATH.
Returned Format:
The query returns Channel1 or Channel2, Channel3, Channel4, Math.
Example:
:CURS:MANU:SOUR CHAN1 Set the cursor source of manual cursor.
:CURS:MANU:SOUR? Return Channel1.
4. :CURSor:MANUal:CURAX
Command Format:
:CURSor:MANUal:CURAX <value>
:CURSor:MANUal:CURAX?
Function:
The command sets the AX position of manual cursor. The <value> range is
4~297.
Returned Format:
The query returns the value of AX position.
Example:
:CURS:MANU:CURAX 100 Set the AX position of manual cursor as 100.
:CURS:MANU:CURAX? Return 100.
5. :CURSor:MANUal:CURAY
Command Format:
:CURSor:MANUal:CURAY <value>
:CURSor:MANUal:CURAY?

Rigol DS1000B Series Specifications

General

Brand	Rigol
Model	DS1000B Series
Category	Test Equipment
Language	English