EasyManua.ls Logo

Rigol DS1000B Series - Page 86

Rigol DS1000B Series
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RIGOL Command Systems
Programming Guide for DS1000B Series
Yor: vertical offset relative to YREF;
Yref: Y reference, the middle point of the screen.
Example:
+1,+0,0,+1,8.000e-009,-6.000e-006,+0,4.000e-002,0.000e000,+100
7. :WAVeform:YINCrement?
Command Format:
:WAVeform:YINCrement? [<source>]
Function:
This command queries the Y unit voltage of the specified source. <source> can
be: CHANnel1, CHANnel2, CHANnel3, CHANnel4 or MATH.
NOTE: returned value= VoltScale /25
Returned Format:
The query returns Y unit voltage, and the unit is V.
Example:
:WAV:YINC? CHAN2 Return 4.000e000.
8. :WAVeform:YORigin?
Command Format:
:WAVeform:YORigin? [<source>]
Function:
The command queries the vertical offset of specified source. The <source> may
be CHANnel1, CHANnel2, CHANnel3, CHANnel4 or MATH.
Returned Format:
The query returns the value of vertical offset, and the unit is V.
Example:
:WAV:YOR? CHAN2 Return -1.600e001.

Other manuals for Rigol DS1000B Series

Related product manuals