Rigol DS1000B Series

Command Systems RIGOL
Programming Guide for DS1000B Series
2-75
9. :WAVeform:XINCrement?
Command Format:
:WAVeform:XINCrement? [<source>]
Function:
The command queries the interval time between two points of the specified
source. The <source> may be CHANnel1, CHANnel2, CHANnel3, CHANnel4 or
MATH.
Returned Format:
The query returns the value of interval, and the unit is s.
Example:
:WAV:XINC? CHAN2 Return 1.000e-003.
10. :WAVeform:XORigin?
Command Format:
:WAVeform:XORigin? [<source>]
Function:
The command queries the time from trigger point to XREF of the specified
source. The <source> may be CHANnel1, CHANnel2, CHANnel3, CHANnel4 or
MATH．
Returned Format:
The query returns the value of time and the unit is s.
Example:
:WAV:XOR? CHAN2 Return 2.000e-002.
11. :WAVeform:XREFerence?
Command Format:
:WAVeform:XREFerence?