conductive dust, rain, or snow. For example: outdoor locations.
Safety Class
Class 1 ā Grounded Product
General Care and Cleaning
General Care:
Do not store or leave the instrument at places where the instrument will be
exposed to direct sunlight for long periods of time.
Cleaning:
Clean the instrument regularly according to its operating conditions. To clean
the exterior surface:
1. Disconnect the instrument from all power sources.
2. Clean the loose dust on the outside of the instrument with a lint- free
cloth (with mild detergent or water). When cleaning the LCD, take care
to avoid scarifying it.
CAUTION
WARNING
To avoid injury resulting from short circuit, make sure the
instrument is completely dry before reconnecting it to a power
source.