Storage: press this key to enter file store and recall interface.
The storable file types include picture, traces, waveforms, setups,
CSV and parameter. Internal and external storage as well as disk
management are also supported.
Cursor: press this key to enter cursor measurement menu. The
oscilloscope provides three cursor modes: manual, track and auto.
Display: press this key to enter display setting menu to set the
display type, persistence time, wave intensity, grid type, grid
brightness and menu display time of the waveform.
Utility: press this key to enter the system function setting menu
to set the system-related functions or parameters, such as I/O
setting, sound and language. Besides, some advanced functions
(such as pass/fail test, waveform record) are also supported.
Print
pressing this key will save the screen to the USB
storage device in “.png” format. If the current storage
type is picture, the screen will be saved in the USB
storage device in picture format (BMP8, BMP24, PNG
and TIFF).
To Next Page
Loading...
