3. Status
Available states include RUN, STOP, T’D (triggered), WAIT and
AUTO.
4. Horizontal Time Base
Represent the time per grid on the horizontal axis on the
screen.
Use HORIZONTAL
SCALE to modify this parameter.
The range available is from 5 ns to 50 s.
5. Sample Rate/Memory Depth
Display the current sample rate and memory depth of the
oscilloscope.
Use HORIZONTAL
SCALE
to modify this
parameter.
6. Waveform Memory
Provide the schematic diagram of the memory position of the
waveform currently on the screen.
7. Trigger Position
Display the trigger position of the waveform in the waveform
memory and on the screen.
8. Horizontal Position
Use HORIZONTAL
POSITION
to modify this parameter.
Press down the knob to automatically set the parameter to
zero.
9. Trigger Type
Display the currently selected trigger type and trigger
condition setting. Different labels are displayed when
different trigger types are selected.
For example:
represents triggering on the rising edge in
“Edge” trigger.
waveform on the
screen